Application Case: Semi-Dry Film Lubrication Upgrade for Plastic Slides in Office Equipment Paper-Feed Mechanisms

November 19, 2026

Latest company case about Application Case: Semi-Dry Film Lubrication Upgrade for Plastic Slides in Office Equipment Paper-Feed Mechanisms
An office-equipment contract manufacturer originally used hydrocarbon grease on the paper-feed and scanner slide mechanisms of printers and copiers. The production line reported three recurring issues: slight grease bleed contaminating the paper path and optical sensors; stick-slip noise after repeated travel of POM sliders on PS rails; and batch torque variation caused by uneven grease dosing. They needed a clean, non-tacky, quick-dry lubricant compatible with common engineering plastics.
Product Selected
MOLYKOTE® L-8033 Semi-Dry Lubricant — composed of perfluoro oil and PTFE uniformly dispersed in a fluoro solvent; after coating, it dries to a white, semi-dry film that is not sticky like grease.
Implementation
After degreasing the parts, L-8033 was applied by dipping or brush. The fluoro solvent evaporated quickly, leaving a uniform semi-dry lubricating film. Per the TDS, the 1/4 oval plastic compatibility test (DTSM2) shows no crack on POM, PS, and ABS, confirming direct suitability for these mixed-plastic sliding pairs. The coefficient of friction is 0.08 for both POM-vs-PS and POM-vs-steel (DTSM1), matching light-load sliding duty in office equipment.
Results (derived from TDS properties; no inflated life claims)
  • Non-tacky film:​ Prevents grease transfer onto paper paths and lens windows, eliminating contamination-related misfeeds or scan defects.
  • Uniform coverage:​ The semi-dry film forms consistently, improving batch-to-batch starting-torque repeatability compared to manual grease dosing.
  • Plastic compatibility:​ No crack observed on POM, PS, and ABS in the 1/4 oval test, avoiding the risk of plastic stress whitening or cracking sometimes associated with hydrocarbon greases.
  • Temperature range:​ -60 to 150°C operating range covers both cold storage/transport and continuous equipment operation.
  • Environmental profile:​ Zero Ozone Depletion Potential (ODP) and lower Global Warming Potential (GWP) than equivalent MOLYKOTE® products, meeting environmental requirements for electronics assembly.
Process Note for Customers
  • Degrease and remove dust from parts before application.
  • Stir lightly if the liquid has settled after prolonged storage.
  • Store in original unopened containers at ≤40°C (104°F); usable life is 36 months from the date of production.
  • Available in 1 kg cans (suitable for dip tanks) and 50 g samples (for pilot validation).
Summary
MOLYKOTE® L-8033 is not positioned as an extreme-endurance solution. Its value lies in the combination of a clean, semi-dry film, proven compatibility with POM/PS/ABS, and a low coefficient of friction (0.08). It directly addresses the pain points of plastic sliding parts in office equipment — contamination, tackiness, and plastic cracking — making it a practical, cleaner alternative to traditional grease in precision mechanisms.
Get in touch with us
Contact Person : ouyang
Tel : +86 13510063180
Characters Remaining(20/3000)