Wacker ELASTOSIL E43 TRAN 01 RTV-1 Silicone Rubber / Adhesive

ELASTOSIL® E43 TRAN 01 is a self-levelling one-component silicone rubber with very good mechanical properties, which cures at room temperature under the influence of atmospheric moisture. It features an acetic acid-curing system and provides excellent primerless adhesion to many substrates, making it a multipurpose glue.

• Acetic acid-curing system

• Self-levelling

• Excellent primerless adhesion to many substrates

• Very good mechanical properties

• One-component, room-temperature curing, easy to use

Curing conditions: 2mm, 14 days storage at 23℃ and 50% RH.
These figures are only intended as a guide and should not be used in preparing specifications.

• Multipurpose glue

• Suitable for applications requiring primerless adhesion to many substrates

• Preliminary tests are recommended to optimize conditions for the particular application

ELASTOSIL® E43 TRAN 01 shows good primerless adhesion to many substrates. We recommend running preliminary tests to optimize conditions for the particular application. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

During vulcanization of ELASTOSIL® E43 TRAN 01, a total of 4% by weight of acetic acid is split off. These vapours should not be inhaled for long periods or in high concentration. Work areas should therefore be well ventilated. Contact of unvulcanized silicone rubber with eyes and mucous membranes must be avoided as this would cause irritation. However if it does happen, rinse the affected area thoroughly. Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from WACKER subsidiaries or may be printed via WACKER web site http://www.wacker.com.