Casa /Prodotti/Adesivo in silicone/MOLYKOTE 7 Silicone Release Compound with Thermal Stability, Food Contact Safe, and Low Migration for Industrial Lubrication

MOLYKOTE 7 Silicone Release Compound with Thermal Stability, Food Contact Safe, and Low Migration for Industrial Lubrication

1
MOQ
7597
prezzo
MOLYKOTE 7 Silicone Release Compound with Thermal Stability, Food Contact Safe, and Low Migration for Industrial Lubrication
Caratteristiche Galleria Descrizione di prodotto Parla adesso.
Caratteristiche
Specificazioni
Forza di adesione: Forte
Altri nomi: Adesivo sensibile alla pressione
Alta resistenza: SÌ
Allungamento: 200%
Superfici adatte: Vetro, metallo, plastica, ceramica
Tipo: Adesivo
Resistenza dielettrica: 500 volt/mil
Metodo di cura: Temperatura ambiente
Resistenza alla trazione: 500 PSI
Viscosità: Alto
Intervallo di temperatura: -60°C a 200°C
Materia prima principale: EPOXY
Colore: Chiaro
Metodo dell'applicazione: Spazzola o ugello
Tempo di cura: 24 ore
Evidenziare:

Thermal Stability Silicone Release Compound

,

Food Contact Safe Industrial Lubricant

,

Low Migration MOLYKOTE 7
Informazioni di base
Termini di pagamento e spedizione
Imballaggi particolari: 18 kg
Tempi di consegna: 5-8
Termini di pagamento: D/P, T/T, Western Union, MoneyGram, L/C
Capacità di alimentazione: 1000
Descrizione di prodotto
MOLYKOTE 7 Release Compound Industrial Multi Purpose Lubrication & Sealing Silicone Compound
MOLYKOTE® 7 Release Compound is a multifunctional silicone-based lubricant featuring exceptional thermal stability. Formulated with a blend of polydimethylsiloxane fluid and inert amorphous silica filler, it appears as a white translucent paste. Operating within a broad temperature range of -40°C to 204°C (-40°F to 400°F), it maintains a density of 1.0 g/cm³ and exhibits high dielectric strength (>450 V/mil) alongside minimal volatility (0.8% evaporation after 24 hours at 200°C).
As a premium release agent, MOLYKOTE® 7 is ideal for metal, rubber, plastic, and adhesive applications, delivering long-lasting lubrication and anti-adhesive performance. Its hydrophobic and antioxidative properties extend service life while meeting FDA 21 CFR 175.300 and NSF 51/61 standards for food-processing machinery and potable water systems. Application methods include manual application, automated equipment, or wiping; however, contact with silicone rubber components should be avoided.
Key Advantages
  • Ultra-wide temperature adaptability: Continuous operating range of 244°C (472°F), suitable for extreme conditions
  • Dual certification safety: Compliant with both food contact (FDA) and potable water safety (NSF 61)
  • Low migration characteristics: Bleed rate of only 6.8% after 24 hours at 200°C, minimizing contamination risks
  • Superior insulation: Volume resistivity of 2.8×10¹⁵ Ω*cm, ideal for high-voltage electrical environments
Key Applications
  • Foundry industry: Mold release for shell and core molds to enhance casting surface finish
  • Tire manufacturing: Bladder lubrication in tire presses to prolong equipment lifespan
  • Plastics processing: Anti-blocking agent for plastic films and release for processing machinery
  • Cable production: Lubrication during rubber cable pulling through conduits
  • Maintenance: Rust and corrosion prevention for rubber components
Technical Specifications
Standard(1) Test Item Unit Result
Physical Properties Color -- White, translucent
CTM 0176 NLGI Grade -- #1
CTM 0191 Penetration, Worked 60 mm/10 270
Penetration, Worked 100k mm/10 322
CTM 0033A Bleed, 24hr/200°C % 6.8
CTM 0033A Evaporation, 24hr/200°C % 0.8
Service Temperature Range °C/°F -40~204
CTM 0022 Specific Gravity @25°C g/cm³ 1.0
Electrical Properties Dielectric Constant @100Hz -- 2.85
CTM 0112 Dielectric Constant @100kHz -- 2.83
CTM 0112 Dissipation Factor @100Hz -- <0.0001
Dielectric Strength @50mil V/mil >450
CTM 0114 Volume Resistivity @23°C Ω*cm 2.8×10¹⁵
CTM 0171 Arc Resistance Seconds 126
Prodotto Tag:

Adesivo strutturale epossidico

Adesivo siliconico strutturale

Adesivo strutturale per incollaggio

Prodotti raccomandati
Mettetevi in ​​contatto con noi
Persona di contatto : ouyang
Telefono : +86 13510063180
Caratteri rimanenti(20/3000)
Mettiti in contatto
101, n. 130 Fengping Road, Shitouling Industrial Zone, villaggio di Wulian, città di Fenggang, città di Dongguan, provincia del Guangdong, Cina
da.oyang@sanbang68.com
+86 13510063180
circa
Profilo aziendale Fatory Tour Controllo di qualità Contattaci
Prodotti
Adesivo in siliconeAraldite EpoxyAdesivo Dowsil Tutte le categorie
Scrivici
Fateci sapere la vostra esigenza. Collegheremo i migliori prodotti con te.
Mappa del sito │ Sito mobile │ politica sulla riservatezza
Cina buon Qualità Adesivo in silicone fornitore. © 2025 Shenzhen Huazhisheng New Material Technology Co., Ltd.. All Rights Reserved.